Purchase Solution

mesh-current equation and node-voltage equation

Not what you're looking for?

Ask Custom Question

Please only do problems 3.62, 3.63, 3.68, 3.69, 3.71, 3.72, 3.74. PLEASE show all equations used, work and PLEASE do not skip steps no matter how minor. I learn by example and need to see everything also including pictures of current flow, directions, picture of how each step progressed, etc..

Please show pictures of step by step of loops and nodes, and equations to solve with answers all the way through to see clearly how you solved it please.

3.62 Find the mesh currents i1, i2, and i3 in the network of Fig 3.106

3.63 Find vx and ix in the circuit shown in fig 3.107

3.68 Find the voltage V0 in the circuit of fig 3.112

3.69 For the circuit shown in fig 3.113, write the node-voltage equations by inspection.

3.71 Write the mesh-current equations for the circuit in Fig 3.115. Next, determine the values i1, i2, and i3.

3.72 By inspection, write the mesh-current equations for the circuit in Fig 3.116.

3.74 By inspection, obtain the mesh current equations for the circuit in Fig 3.118

Attachments
Purchase this Solution
Solution Summary

If finds the mesh-current equation and node-voltage equation of the circuit. Then the voltage and current are found by solving the equations. The solution is detailed and has '5/5' rating.

Purchase this Solution
Free BrainMass Quizzes
Air Pollution Control - Environmental Science

Working principle of ESP

Architectural History

This quiz is intended to test the basics of History of Architecture- foundation for all architectural courses.

View More Free Quizzes
Related BrainMass Solutions

  • Mutual inductance, transformers 2 questions & solutions

    =0 {1} Node B: (noting current, I_3, due to supply V_3, is the only current that defies our convention flowing into node N_B and so appears as negative in the node equation) V_B/Z_5 +(V_B-V_2)/Z_3 +(V_B-V_A)/Z_2 -I_3=0 {2} Super-node

  • Solving for voltage and current in an electric circuit using loop analysis and node analysis.

    492471 Loop Analysis and Node Analysis: Current and Voltage ** Please see the attached file for the complete problem description ** Solve using any method including Node Analysis, Source transformation, Voltage Divider Rule, Current Divider Rule.

  • Determine the Mesh Current

    37626 Determine the Mesh Current Determine the mesh currents ia and ib in the circuit shown.

  • mesh current method for electric circuit analysis

    Calculate all of the unknown voltages and currents in the above circuit, using either node-voltage, mesh-current, or superposition method. Mark your answers directly on a copy of circuit.

  • Resistors

    14033 Resistors Question: For the circuit modeled in the attached file (titled: Resitor.doc), determine the current in each resistor and the voltage across the 200 ohm resistor. See the attached file.

  • Find iy(t) if Vs(t)

    *is(t) - vs(t)}/90 iy = {60*3*u(t-1) - 90*u(t)}/90 iy = 2u(t-1) - u(t) A -- Answer(d) Find the equation for LHS mesh using Kirchhoff's voltage law and at one of the junctions using Kirchhoff's current law.

  • inductor current after the switch closes

    After the switch is closed, Using the mesh current and , applying KVL: For the mesh current on the left, So the current controlled voltage source is .

  • Node-Voltage Method to Solve the Circuit

    a) Use the node-voltage method to derive a set of linear equations that could be used to solve for the unknown node voltages va, vb, and bc in the above figure. Collect you equations into a matrix equation of form Ax = b.

  • Solve for Node Voltage; Write KCL and KVL Equations

    Specify VR4 and VR5 in terms of VN and the known values of V4 and V5 f. Using the values for VR4 and VR5, from the step above write a KCL equation for the currents at the node point N g. Solve for the node voltage VN h.

View More Related Solutions