Purchase Solution

Rotor Slip, Current, Angular Velocity

Not what you're looking for?

Ask Custom Question

The name plate on a 460 V 50 hp 60 Hz four pole motor indicates that its speed at rated load is 1760 r/min. Assume the motor to be operating at rated load.
a) What is the slip of the rotor?
b) What is the frequency of the rotor currents?
c) What is the angular velocity of the stator field with respect to the stator? With respect to the rotor?
d) What is the angular velocity of the rotor field with respect to the rotor? With respect to the stator?

Purchase this Solution
Solution Summary

Calculations given find slip, frequency of currents and angular velocity of the stator and rotor fields.

Solution Preview

=====================================================

Synchronous Speed = Ns = 120*f/p = 120*60/4 = 1800 RPM

a) ...

Purchase this Solution
Free BrainMass Quizzes
Air Pollution Control - Environmental Science

Working principle of ESP

Architectural History

This quiz is intended to test the basics of History of Architecture- foundation for all architectural courses.

View More Free Quizzes
Related BrainMass Solutions

  • Centripetal Acceleration Rotor

    39445 Centripetal Acceleration Rotor A centrifuge rotor is accelerated from rest to 20,000 rpm in 5.0 min: (a) What is the current angular speed (omega) in rad/sec? (b) What is the angular acceleration (alpha)rad/sec^2?

  • Wind turbine mechanical torque delivered to a generator

    In that case the angular velocity of the generator will be different to that of the rotor and will be required or the specification of the gears used are required.

  • Dynamics Problem - Torque, Acceleration, and Angular Velocity

    It uses step by step calculations for the power off and power on phases for the system to find out angular acceleration and angular velocity.

  • Sedimentation and svedberg equation

    Since sedimentation coefficient is the sedimentation velocity modified by constants (r is the rotor radius, and w is the angular velocity, already specified as constant), we can treat v and s the same, so anything that modifies one will modify the other

  • How far from the center of a record can the coin be placed without having it slip off?

    Assume that the coin can be placed (m) far from the center of the record without having it slip off. So the angular velocity of the coin measured in radians is . Now we can find the translational velocity of the coin.

  • Induction motor(IM) taking care of slip and syncronous speed

    (d) Find the frequency of the rotor currents. (e) Find the speed of rotation of the magnetic field in the air gap with respect to the rotor. (a) Since the slip is greater than one, the divice must be braking.

  • Rotational Kinematics of a Rotor

    104128 Rotational Kinematics of a Rotor The angular speed of the rotor in a centrifuge increases from 420 to 1420 rad/s in a time of 5.00 s. (a.)What is the angle through which the rotor turns.

  • Angular Velocities of a Pulley

    30100 Angular Velocities of a Pulley If the end of the cord is pulled downward with a speed Vc= 120mm/s, determine the angular velocities of pulleys A and B and the speed of block D. Assume that the cord does not slip on the pulleys.

  • the minimum coefficient of static friction

    It finds the minimum coefficient of static friction so that the people will not slip down in the rotor ride at a carnival.

View More Related Solutions