Purchase Solution

EDTA-pY3+ titration plot

Not what you're looking for?

Ask Custom Question

Consider the titration of 50.0 mL of 0.0110 M Y^3+ (y=yttrium) with 0.0220 M EDTA at pH 5.00. Calculate pY^3+ at the following volumes of added EDTA and sketch the titration curve: (a) 0mL (b) 10.0 mL (c) 25 mL (d) 30.0 mL.

Purchase this Solution
Solution Summary

A titration curve for Y3+-EDTA is plotted after calculating values.

Solution Preview

See the attached file.

So I'm showing the calculations for the required volumes. If you plot this, you don't get a smooth curve (shown on page 1 in excel file). Instead if you add a few more points, you can ...

Purchase this Solution
Free BrainMass Quizzes
Match Elements with their Symbols

Elements are provided: choose the matching one- or two-letter symbol for each element.

Functional groups in Organic Chemistry

You will be tested on the names of functional groups in Organic Chemistry. It is very important to know the functional groups to understand Organic reactions.

Thermochemistry

The quiz helps in revising basic concepts about thermochemistry.

Organic Chemistry Naming: Alkanes

This is a quiz which is designed to assist students with learning the nomenclature used to identify organic compounds. This quiz focuses on the organic compounds called Alkanes.

Periodic table

View More Free Quizzes
Related BrainMass Solutions

  • Chemistry Quant Sample Problems

    EDTA III Consider the EDTA titration below: Zn2+ + Y4- ↔ ZnY2- Kf = 3.2×1016 a.) How many mL of 0.1050 M EDTA solution are required to reach the equivalence point in the titration of 20.00 mL of 0.1433 M Zn2+, buffered at pH 10.00?

  • Zinc in a Cough Drop

    Complexometric Titration I just did a lab that dealt with finding the amount of Zinc found in cough drops. I did this by EDTA titration. First I dissolve one cough drop in 50mL's of a acetate buffer in an erlenmeyer flask.

  • Groundwater Hardness -EDTA titration

    The hardness of groundwater is determined from an EDTA titration.

  • Determining groundwater hardness

    Titration of the excess unreacted EDTA required 17.8 mL of 0.0130 M Ca2+. The Cd2+ was displaced from EDTA by the addition of an excess of CN-. Titration of the newly freed EDTA required 26.9 mL of 0.0130 M Ca2+ .

  • Capillary Zone Electrophoresis, Molar Solubility and Titrations

    titration. 5) Calculates the pH of a solution in a titration.

  • Chelate with a metal ion

    Then calculate the free [EDTA] from the equilibrium expression, and the quantity of EDTA needed from the sum of the bound and free EDTA. See the attached file Problems based on metal-EDTA titration are solved.

  • EDTA

    It was warmed to 40C and titrated with 39.98 mL of 0.04500 M EDTA complex. The liberated EDTA required 10.26 mL of standard 0.20 65 M Mn2+ for complete titration.

  • Determination of Ca2+ and Mg2+ with EDTA

    Dilute to the mark and mix well. 8-Transfer a 10mL aliquot of the unknown solution to a 250mL Erlenmeyer flask and repeat the titration procedure of steps 4-5. 9-Repeat step 8 two more times.

  • titration curve

    Plot (do not sketch) the resulting titration curve (pH vs. moles NaOH added) showing all inflection points. Show your calculations and be sure to state your assumptions.

View More Related Solutions